| 型號 | Model | ZX-300 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 55 | 60 | 65 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22 | 20 | 18.5 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 713 | 848 | 778 |
| 射膠重量(PS) | Shot weight (PS) | g | 626 | 780 | 916 |
| 射膠重量(PS) | Shot weight (PS) | oz | 23.2 | 27.6 | 32.4 |
| 螺桿行程 | Screw stroke | mm | 300 | ||
| 射膠壓力 | Injection pressure | Mpa | 194 | 163 | 139 |
| 理論射膠速率 | Injection rate | g/s | 220 | 262 | 308 |
| 最大螺桿轉速 | Max. screw speed | rpm | 195 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 3000 | ||
| 移模行程 | Toggle stroke | mm | 580 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 605*605 | ||
| 最小模厚 | Min.mold thickness | mm | 220 | ||
| 最大模厚 | Max.mold thickness | mm | 640 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 180 | ||
| 頂出力 | Hydraulic ejection force | KN | 53 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 32 | ||
| 電熱量 | Heating capacity | kw | 17.2 | ||
| 郵箱容量 | Oil tank capacity | L | 450 | ||
| 外形尺寸 | Machine dimensions | m | 6.4*1.6*2.4 | ||
| 理論機重 | Machine weight | Tom | 8.5 | ||
- CN